Best in class light bars, pod lights, and headlights. Assembled in the USA.

Ford Bronco (2021+) - LED Fog Light Kit


Regular price $939.99 |  Save $-939.99 (Liquid error (sections/product-template line 251): divided by 0% off)
/

Ships in 7-10 Days

Overview

The Ford Bronco LED Fog Light Kit (2021+) is the best LED fog light kit on the market for your Ford SUV. They are Designed, Assembled, Supported, and Shipped in Centerville, Utah. The Bronco fog light kit increases your visibility two-fold from OEM fog light kits. We’ve custom built the fog light kit housing in a sleek, simple stainless steel powder coated bracket. The install is easy with the plug and play wire harness and you can choose your selection of amber vs. clear lens options. This fog light kit is compatible with Ford Bronco ('21+)

Features

  • (2) Quattro LED Light Pods
  • (4) BA-2 LED Light Pods
  • Premium Stainless Steel Powder Coated Fog Light Bracket 
  • USA Patented 6061 CNC Aluminum Grade Billet Housing 
  • Wire Harness is Included In Kit

Vehicle Trim Compatibility

Ford Bronco ('21+) 

Details/Specs


The Ford Bronco LED Fog Light Kit is comprised of two BA-2 LED Light Pods and one Quattro LED Light Pod per side. Fog Light Kit Brackets are included.  Kit includes both driver and passenger side.

Quattro Light Pod

Shipping Weight
4 lbs
Type
Quattro LED Light Pod 
Housing
CNC Aircraft-Grade Aluminum 
Location
Fog Light Replacement 
Light Color
White
Wattage 24W
Amp Draw at 13.8V 2A

9V-36V
IP Rating 1P68
DIM (Light Only) L 3” x D 1.5” x H 3”  
DIM (Light W/ Bracket): N/A
Lumens 3000 lm 
Lux At 10m Spot: 825 lx
Flood: 176 lx
Combo: 500 lx 
Candela Spot: 82500 cd
Flood: 17550 cd
Combo: 50025 cd
Beam Distance Spot: 574 m
Flood: 265 m
Combo: 447 m
DOT Compliant No
Prop 65 No
SAE/ECE No


BA-2 Light Pod

Shipping Weight
3 lbs
Type
2” LED Light Bar 
Housing
CNC Aircraft-Grade Aluminum 
Location
Fog Light Replacement 
Lens Color
Amber 
Wattage 12W
Amp Draw at 13.8V .8A
Voltage 9V-36V
IP Rating 1P68
DIM (Light Only) L 3” x D 1.5” x H 2” 
DIM (Light W/ Bracket): N/A
Lumens 
Lux At 10m Spot: 413 lx
Flood: 88 lx
Candela Spot: 41250 cd
Flood: 8775 cd
Beam Distance Spot: 406 m
Flood: 187 m
DOT Compliant No
Prop 65 No
SAE/ECE No

 



Customer Reviews
4.7 Based on 6 Reviews
5 ★
67% 
4
4 ★
33% 
2
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
A
09/20/2023
Al
United States United States

Excellent build. Highest standards against the competition

The installation is straightforward. Some tips to make it easy. Tape the front of the lights with painter's tape (eliminates potential scratches). The Bronco opening is tight. Identify the left and right brackets. There is a slight upward curve to the rear edge of the bracket. This curve is the top of the bracket. (distinguishes the left and right sides.) Tighten the lights sufficiently to move the lights for later alignment. The 7/16 wrench is used for tightening the lights after final alignment. Mount the lights to the rear of the elongated slots (if you mount them toward the front of the slot, the lights will be too tight against the rear edge of the bumper opening.) As an extra precaution, you may want to tape the bumper opening. Use a 3/8 rachet with an extension to remove the inner frame bolt (radiator side). The outward bolt has a sufficient thread where the supplied flange nut and spacer will easily attach. The spacer is placed with the flat side down. Once the bracket is positioned, slide them toward the radiator. This allows the larger light to fully be exposed in the opening. Position the bracket on the inside with the bolt, then raise it to the outside threaded bolt. Place the spacer (hallowed-out side up - it slides over the factory threaded clip). You are now able to align the lights and tighten them with the 7/16 wrench. Wiring - if you have the factory switches - match the color wire with the switch to operate the inside light separate from the remaining two. Cut the harness as shown in the video if you are not using the switches. I solder my connections. I ran the entire harness down in front of the battery. Positioning along the core support may expose it to the latches, braces, etc. It will tuck into the space between the top of the bumper and the lower grill valence. Use heavier zip ties to secure the harness.

Heretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit Review
A Heretic Studio Customer
J
07/10/2023
Josh
United States United States

Great Lights

Wired up Ambers to Upfitter #3, and was able to use an OEM fog switch, FORScan, plug adapter, and factory wiring for the pairs of white fogs. Works awesome. Lights have great output.

Heretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit ReviewHeretic Studio Ford Bronco (2021+) - LED Fog Light Kit Review
B
06/26/2023
Brett
United States United States

Win

Great product and easy install if you know what you’re doing…. I didn’t but could cut down my time from 2 hours to 20 minutes if I did it again… the two sets of wires that you get aren’t for left and right…. Great customer service HINT: The two long wires go to the passenger side lights and the short wires go to the driver side lights. Adjust the lights prior to install… aka push them to the front of the holes of the attachment piece and loosen the vertical movement piece on the lights themselves to all be equal. Lastly, I had to ground the wiring to my battery as I didn’t have the screw per the YouTube video.

What are you looking for?